T 3361 018

4 5 6 3 2 F 45 17 E Number of contacts Contact arrangement Contact arrangement Rated voltage2) Rated voltage Rated impulse withstand voltage2) Pollution degree2) Installation category Insulation group C Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Current rating Insulation resistance Contact resistance Climatic category Temperatur range IP degree Insertion and withdrawal force mechanical operation housing material dielectric material contacts termination technique wire gauge flamability locking system B Standard IEC 61076-2-106 1) IEC 60130-9 IEC 60664-1 IEC 60664-1 60664-1 IEC 60664-1 IEC 60664-1 IEC 60512-5-2 UL 1977 IEC 60512-3-1 IEC 60512-2-1 IEC 60668-1 IEC 60668-1 ÎEC 60529 1200 V (800 V) IEC IEC 60512-13-2 60512-9-1 Ag T 3671 001 U (14-b) Au T 3671 018 U 14 Ag T 3651 001 U (14-a) Au T 3651 000 U 12 Ag T 3636 001 U (12-a) Au T 3636 000 U 8 Ag T 3505 001 U (08-a) Au T 3505 018 U 7 (07-b) Ag T 3485 001 U Au T 3485 018 U 7 Ag T 3476 001 U (07-a) Au T 3476 018 U 14-b 19-a (6-a) Au T 3401 018 U 5 Ag T 3361 010 U (05-b) Au T 3357 018 U 5 Ag T 3361 001 U (05-a) Au T 3361 018 U 4 (04-a) Ag T 3301 001 U Au T 3301 018 U 10 Ohm -40°C...+100°C / -40°F...+212°F IP 40 25N 30N 35N 35N 50N 55N 55N 60N 50N 50N 50N 60N Silver >500 mating cycles / Gold >1000 mating cycles UL 94 VO metal screw coupling; tightening torque 0,7 - 1,5 Nm Contact Number of contacts arrangement (Contact arrangement acc. View on DIN EN 61076-2-106) mating side Gewicht (errechnet) / Calc WT : 29,13 g Prüfmaß / Testdimension Teileindex / Partindexnumber: Edition 2000-05 values in brackets are according to DIN EN 61076-2-106 3) under operating conditions >108 Ohm A Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Remark for gold plated contacts: In order to avoid brittle inter-metallic connections, gold plated terminals have to be tin-plated in the solder area. All technical data have been measured in a laboratory environment and can be different during pratical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guaranties ("Beschaffenheitsgarantie" or " Haltbarkeitsgarantie"). 5 Zul. Abw./Tolerances : ISO 2768-c Bagatelle change: 23.02.2021 MCARLE Gez. Maßstab / Scale : 2:1 E D C 202000083 Index Änderung/Description 01 05.02.2021 MCARL Datum/Date Name B A3 CUSTOMER DRAWING DIN / ISO 13715 08.12.2020 Drawn MCARLE Status Released Gepr. 10.02.2021 Checked MBERTSCH 2) 6 F 3) brass and / or zinc die cast, nickel plated or thermoplast thermoplastic silver or gold plated solder